Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

network

vpn router ospf area interface network—Set the OSPF network type (on vEdge routers only).

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► OSPF

Command Hierarchy

vpn vpn-id
  router
    ospf
area number
        interface interface-name
          network (broadcast | point-to-point)

Options

Network Type
(broadcast | point-to-point)
Set the OSPF type of network to which the interface is connect. A broadcast network is a WAN or similar network. In a point-to-point network, the interface connects to a single remote OSPF router. 
Default: broadcast

Operational Commands

show ospf interface

Example

Configure an interface as a point-to-point interface:

vm1# show running-config vpn 1 router ospf area 0
vpn 1
 router
ospf
   area 0
    interface ge0/1
      point-to-point
    exit
   exit
  !
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Routing CLI Reference article for your software release.

  • Was this article helpful?