max-control-connections
vpn 0 interface tunnel-interface max-control-connections—Configure the maximum number of vSmart controllers that the vEdge router is allowed to connect to (on vEdge routers only).
vManage Feature Template
For vEdge routers only:
Configuration ► Templates ► VPN Interface Cellular (for vEdge cellular wireless routers only)
Configuration ► Templates ► VPN Interface Ethernet
Configuration ► Templates ► VPN Interface PPP
Command Hierarchy
vpn 0 interface interface-name tunnel-interface max-control-connections number
Options
- Maximum Number of Controllers
- number
Set the maximum number of vSmart controllers that the vEdge router can connect to. These connections are DTLS or TLS control plane tunnels.
Range: 0 through 100
Default: Maximum number of OMP sessions configured with the system max-omp-sessions command.
Operational Commands
show control affinity config
show control affinity status
show control connections
show control local-properties
Example
Change the maximum number of vSmart controller connections to 4:
system max-control-connections 4
Release Information
Command introduced in Viptela Software Release 15.4. This command replaces the max-controllers command.
In Release 16.1, maximum number of controllers changed from 8 to 100, and default value changed from 2 to maximum number of configured OMP sessions.
Additional Information
See the Configuring Affinity between vSmart and vEdge Devices article for your software release.
controller-group-id
controller-group-list
exclude-controller-group-list
max-omp-sessions