Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

ipv6 route

vpn 0 ipv6 route—Configure an IPv6 static route in a VPN (on vEdge routers only).

In Release 16.3, you can configure IPv6 only in VPN 0.​

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► VPN

Command Hierarchy

vpn 0
  ipv6 route prefix/length next-hop [administrative-distance]

Options

Address of Static Route
prefix/length
IPv6 address of the static route, written as the prefix and prefix length.
Administrative Distance of Route
administrative-distance
Assign an administrative distance to the route. This value is used to determine the best route when multiple paths exist to the same destination.
Range: 1 through 255
Default: 0
Next Hop towards the Destination
next-hop
IPv6 address of the next hop to reach the static route. The next hop can be one of the following:
ipv6-address—IP address of the next-hop router.
null0—Next hop is the null interface. All packets sent to this interface are dropped without sending any ICMPv6 messages.

Operational Commands

show ip routes (for IPv4 routes)
show ipv6 routes

Example

Configure a static route to the prefix with a next hop of the null interface:

vpn 0
  ipv6 route 2001:1111:2222:3333::/64 null0

Release Information

Command introduced in Viptela Software Release 16.3.

Additional Information

ip route

  • Was this article helpful?