Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

interface ppp

vpn interface ppp—Configure the Point-to-Point Protocol over Ethernet (PPPoE) (on vEdge routers only).

vManage Feature Template

For vEdge router:
Configuration ► Templates ► VPN Interface PPP
Configuration ► Templates ► VPN Interface PPP Ethernet

Command Hierarchy

vpn vpn-id 
  interface interface-name    
    access-list acl-list
    arp 
      ip ip-address mac mac-address    
    arp-timeout seconds
    autonegotiate 
    clear-dont-fragment  
    description textduplex (full | half) 
    flow-control (bidirectional | egress | ingress) 
    (ip address prefix/length | ip dhcp-client [dhcp-distance number])
    (ipv6 address ipv6-prefix/length | ipv6 dhcp-client [dhcp-distance number] [ dhcp-rapid-commit]
    keepalive seconds retries 
    mac-address mac-address    
    mtu bytes 
    policer policer-name
    pppoe-client
      ppp-interface name 
    qos-map name
    rewrite-rule name
    shaping-rate name
    shutdown
    speed speed 
    static-ingress-qos number 
    tcp-mss-adjust bytes
    tloc-extension interface-name 

Options

Interface Name
pppnumber
Number of the PPP interface. number can be from 1 through 31.

Example

Configure PPPoE:

vEdge# show running-config vpn 0
vpn 0
interface ge0/1
  pppoe-client ppp-interface ppp10
  no shutdown
!
interface ppp10
  ppp authentication chap
   hostname branch100@corp.bank.myisp.net
   password $4$OHHjdmsC6M8zj4BgLEFXKw==
  !
  tunnel-interface
   encapsulation ipsec
   color gold
   no allow-service all
   no allow-service bgp
   allow-service dhcp
   allow-service dns
   allow-service icmp
   no allow-service ospf
   no allow-service sshd
   no allow-service ntp
   no allow-service stun
  !
  mtu      1492
  no shutdown
 !
!

Additional Information

See the Configuring PPPoE article for your software release.

Release Information

Command introduced in Viptela Software Release 15.3.
In Release 16.3, add support for IPv6.

  • Was this article helpful?