Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

interface

vpn router ospf area interface—Configure the properties of an interface in an OSPF area (on vEdge routers only).

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► OSPF

Command Hierarchy

vpn vpn-id
  router
    ospf
      area number
        interface interface-name
          authentication
            authentication-key key
            message-digest key
            type (message-digest | simple)
          cost number
          dead-interval seconds
          hello-interval seconds
          network (broadcast | point-to-point)
          passive-interface
          priority number 
          retransmit-interval seconds

Options

Interface Name
interface-name
Name of the interface, in the format geslot/port or loopbacknumber.

Operational Commands

show ospf interface

Example

Configure interface ge0/0 to be in area 0:

vm1# show running-config vpn 1 router ospf area 0
vpn 1
 router
ospf
   area 0
    interface ge0/0
    exit
   exit
  !
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Routing CLI Reference article for your software release.

  • Was this article helpful?