Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

dead-interval

vpn router ospf area interface dead-interval—Set the interval during which at least one OSPF hello packet must be received from a neighbor before declaring that neighbor to be down (on vEdge routers only).

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► OSPF

Command Hierarchy

vpn vpn-id
  router
    ospfarea number
        interface interface-name
          dead-interval seconds

Options

Dead Interval
seconds
Time interval during which the vEdge router must receive an OSPF hello packet from its neighbor. If no packet is received, the vEdge router assumes that the neighbor is down. The default dead interval of 40 seconds is four times the default hello interval of 10 seconds.
Range: 1 through 65535 seconds
Default: 40 seconds

Operational Commands

show ospf interface

Example

Set the OSPF dead interval to 30 seconds:

vEdge# show running-config vpn 1 router ospf area 0
vpn 1
 router
ospf
   area 0
    interface ge0/0
      dead-interval 30
    exit
   exit
  !
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Routing CLI Reference article for your software release.
hello-interval

  • Was this article helpful?