Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

compatible rfc1583

vpn router ospf compatible rfc1583—Calculate the cost of summary routes based on RFC 1583 rather than RFC 2328 (on vEdge routers only). By default, calculation is done per RFC 1583.

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► OSPF

Command Hierarchy

vpn vpn-id  
  router
    ospf   
      compatible rfc1583

Options

RFC 2328 Compliance
no compatible rfc1583
Per RFC 1583, RFC 1583 compliance is enabled by default, and no configuration is necessary. To calculate the cost of OSPF summary routes based on RFC 2328, include the no compatible rfc1583 configuration command.

Operational Commands

show ospf process

Example

Check that RFC 1583 compliance is the default:

vm1# show running-config vpn 1 router ospf area 0
vpn 1
 router
  ospf
   area 0
    interface ge0/0
    exit
   exit
  !
 !
!
vm1# show ospf process | include rfc1583
 rfc1583-compatible    true

Enable RFC 2328 compliance:

vm1# config
Entering configuration mode terminal
vm1(config)# vpn 1 router ospf
vm1(config-ospf)# no compatible rfc1583
vm1(config-ospf)# show config
vpn 1
router
  ospf
   no compatible rfc1583
  !
!
!
vm1# show ospf process | include rfc1583
rfc1583-compatible    false
vm1#

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Routing CLI Reference article for your software release.

  • Was this article helpful?