Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation


vpn interface dot1x auth-req-attr—Configure RADIUS authentication attribute–value (AV) pairs to send to the RADIUS server during an 802.1X session (on vEdge routers only). These AV pairs are defined in RFC 2865, RADIUS, and they are placed in the Attributes field of the RADIUS Accounting Request packet.

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► VPN Interface Ethernet

Command Hierarchy

vpn 0
  interface interface-name
      auth-req-attr attribute-number (integer integer | octet octet | string string)


Authentication Attribute Number
RADIUS authentication attribute number.
Range: 1 through 64
Attribute Value
(integer integer | octet octet | string string)
Value of the attribute. Specify the value as an integer, octet, or string, depending on the authentication attribute itself.


Set the Service-Type authentication attribute to service type 2, which is a Framed service:

vEdge# show running-config vpn 0 dot1x
vpn 0
  name "Transport VPN"
  interface ge0/5
    auth-req-attr 6 integer 2

Release Information

Command introduced in Viptela Software Release 16.3.​

  • Was this article helpful?