system allow-same-site-tunnels—Allow tunnels to be formed between vEdge routers in the same site (on vEdge routers only). Note that no BFD sessions are established between the two collocated vEdge routers.
vManage Feature Template
For vEdge routers only:
Configuration ► Templates ► System
In this example, vEdge2 has two circuits, one to the Internet and the second to an MPLS network. vEdge1 is also located at the same site, but has no circuits. This configuration binds two subinterfaces from vEdge1 to the two circuit interfaces on vEdge2 so that vEdge1 can establish TLOCs on the overlay network.
vEdge1# show running-config system allow-same-site-tunnels ... vEdge1# show running-config vpn 0 interface ge0/2.101 ip address 22.214.171.124/24 mtu 1496 tunnel-interface color lte ! no shutdown ! interface ge0/2.102 ip address 126.96.36.199/24 mtu 1496 tunnel-interface color mpls ! no shutdown ! vEdge2# show running-config system allow-same-site-tunnels ... vEdge2# show running-config vpn 0 interface ge0/0 ip address 172.16.255.2 tunnel-interface color lte ! no shutdown ! interface ge0/3 ip address 172.16.255.16 tunnel-interface color mpls ! no shutdown ! interface ge0/2.101 ip address 188.8.131.52/24 mtu 1496 tloc-extension ge0/0 no shutdown ! interface ge0/2.102 ip address 184.108.40.206/24 mtu 1496 tloc-extension ge0/3 no shutdown !
Command introduced in Viptela Software Release 15.4.