Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

display xml

display xml—Render the command output as XML.

Command Syntax

display xml

Options

None

Output Fields

The output is self-explanatory.

Example Output

vedge1# show control local-properties | display xml
<config xmlns="http://tail-f.com/ns/config/1.0">
  <control xmlns="http://viptela.com/security">
  <local-properties>
    <device-type>vedge</device-type>
    <organization-name></organization-name>
    <certificate-status>Not-Installed</certificate-status>
    <root-ca-chain-status>Not-Installed</root-ca-chain-status>
    <dns-name>10.0.14.4</dns-name>
    <site-id>1</site-id>
    <domain-id>1</domain-id>
    <system-ip>172.16.255.1</system-ip>
    <keygen-interval>0:01:00:00</keygen-interval>
    <number-vbond-peers>0</number-vbond-peers>
    <number-active-wan-interfaces>1</number-active-wan-interfaces>
    <wan-interface-list>
      <index>0</index>
      <public-ip>0.0.0.0</public-ip>
      <public-port>0</public-port>
      <private-ip>10.0.11.1</private-ip>
      <private-port>12346</private-port>
      <num-vsmarts>0</num-vsmarts>
      <weight>1</weight>
      <color>default</color>
      <preference>0</preference>
      <admin-state>unknown</admin-state>
      <operation-state>unknown</operation-state>
    </wan-interface-list>
  </local-properties>
  </control>
</config>

Release Information

Command introduced in Viptela Software Release 14.1.

  • Was this article helpful?