Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

count

count—Count the number of lines in the command output. The count of lines includes the line on which you type the command.

Command Syntax

count

Options

None

Output Fields

The output fields are self-explanatory.

Example Output

hw-vedge# show ip routes vpn 0
Codes Proto-sub-type:
  IA -> ospf-inter-area,
  E1 -> ospf-external1, E2 -> ospf-external2,
  N1 -> ospf-nssa-external1, N2 -> ospf-nssa-external2,
  e -> bgp-external, i -> bgp-internal
Codes Status flags:
  F -> fib, S -> selected, I -> inactive,
  B -> blackhole, R -> recursive

                        PATH             PROTOCOL          NEXTHOP                                                
VPN  PREFIX             ID    PROTOCOL   SUB TYPE  METRIC  IFNAME   NEXTHOP ADDR    TLOC IP  COLOR  ENCAP  STATUS 
-------------------------------------------------------------------------------------------------------------------
0    0.0.0.0/0          0     Static     -         0       ge0/0    50.197.173.190  -        -      -      F,S    
0    1.1.1.254/32       1     Connected  -         1       system   -               -        -      -      F,S    
0    50.197.173.184/29  2     Connected  -         1       ge0/0    -               -        -      -      F,S

hw-vedge# show ip routes vpn 0 | begin 0 | count
Count: 4 lines

Release Information

Command introduced in Viptela Software Release 14.1.

Additional Information

linnum

  • Was this article helpful?