Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

begin

begin—Display the command output beginning with the line that contains the specified string. The string is case-sensitive.

Command Syntax

begin string

Options

String to Match
string
Text string to find to start displaying command output. The string is case-sensitive.

Output Fields

None

Example Output

vedge# show ip route 
Codes Protocol:                         <-- These 11 lines explain the values in the output.
  C -> connected, S -> static               
  O -> ospf, B -> bgp
  M -> omp
Codes Proto-sub-type:
  IA -> ospf-inter-area
  E1 -> ospf-external1, E2 -> ospf-external2
  N1 -> ospf-nssa-external1, N2 -> ospf-nssa-external2
  e -> bgp-external, i -> bgp-internal
Codes Rstatus flags:
  F -> fib, S -> selected
                                PROTOCOL  NEXTHOP  NEXTHOP                                    
VPN  ROUTE            PROTOCOL  SUB TYPE  IFNAME   ADDR       TLOC IP  COLOR  ENCAP  RSTATUS  
----------------------------------------------------------------------------------------------
0    0.0.0.0/0        S         -         ge0/0    10.0.11.3  -        -      -      F,S      
0    10.0.11.0/24     C         -         ge0/0    -          -        -      -      F,S      
0    10.0.100.0/24    C         -         ge0/7    -          -        -      -      F,S      
0    172.16.255.1/32  C         -         system   -          -        -      -      F,S      

vedge# show ip route | begin PROTOCOL     <-- Display only the IP routes, without the key.
                                             
                                PROTOCOL  NEXTHOP  NEXTHOP                                    
VPN  ROUTE            PROTOCOL  SUB TYPE  IFNAME   ADDR       TLOC IP  COLOR  ENCAP  RSTATUS  
----------------------------------------------------------------------------------------------
0    0.0.0.0/0        S         -         ge0/0    10.0.11.3  -        -      -      F,S      
0    10.0.11.0/24     C         -         ge0/0    -          -        -      -      F,S      
0    10.0.100.0/24    C         -         ge0/7    -          -        -      -      F,S      
0    172.16.255.1/32  C         -         system   -          -        -      -      F,S      

Release Information

Command introduced in Viptela Software Release 14.1.

Additional Information

until

  • Was this article helpful?